Adafruit Trinket M0 – for use with CircuitPython & Arduino IDE

  1. Same size, form factor, and pinout as a classic Trinket
  2. Updating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+
  3. 256KB Flash – 32x as much as 8 KB on ATtiny85
  4. 32 KB RAM – 64x as much as 512 bytes on ATtiny85
  5. 48 MHz 32-bit processor – 6x as fast as ATtiny85 (not even taking into account 32-bit speedups)
  6. Native USB supported by every OS

 100.10

Out of stock

Out of stock

14 People watching this product now!
Microcontroller

ATSAMD21E18 32-bit Cortex M0+

Clock speed

48 MHz

Flash memory

256 KB

RAM

32 KB

Operating voltage

3.3V

Digital I/O pins

5 (shared with analog pins)

Analog input pins

3 (shared with digital pins)

PWM output pins

3 (shared with digital pins)

Shipping Weight 0.003 kg
Shipping Dimensions 10 × 3 × 2 cm

The Adafruit Trinket M0 may be small, but do not be fooled by its size! It’s a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low-cost enough to use without hesitation. Perfect for when you don’t want to give up your expensive dev-board and you aren’t willing to take apart the project you worked so hard to design. It’s our lowest-cost CircuitPython programmable board!

We’ve taken the same form factor we used for the original ATtiny85-based Trinket and given it an upgrade. The Trinket M0 has swapped out the lightweight ATtiny85 for an ATSAMD21E18 powerhouse. It’s just as small, and it’s easier to use, so you can do more.

The most exciting part of the Trinket M0 is that while you can use it with the Arduino IDE, we are shipping it with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with main.py on it. Edit main.py with your favorite text editor to build your project using Python, the most popular programming language. No installs, IDE, or compiler is needed, so you can use it on any computer, even ChromeBooks or computers you can’t install software on. When you’re done, unplug the Trinket M0 and your code will go with you.


Features:

  1. Same size, form factor, and pinout as a classic Trinket
  2. Updating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+
  3. 256KB Flash – 32x as much as 8 KB on ATtiny85
  4. 32 KB RAM – 64x as much as 512 bytes on ATtiny85
  5. 48 MHz 32-bit processor – 6x as fast as ATtiny85 (not even taking into account 32-bit speedups)
  6. Native USB supported by every OS – can be used in Arduino or CircuitPython as USB serial console, Keyboard/Mouse HID, and even a little disk drive for storing Python scripts. (ATtiny85 does not have a native USB)
  7. Can be used with Arduino IDE or CircuitPython
  8. Built-in green ON LED
  9. Built-in red pin #13 LED
  10. Built-in RGB DotStar LED
  11. All 5 GPIO pins are available and are not shared with USB – so you can use them for whatever you like!
  12. Same Reset switch for starting your project code over
  13. Power with either USB or external output (such as a battery) – it’ll automatically switch over
  14. Mounting holes! Yeah!
  15. Really really small
  16. UART, SPI, and I2C hardware support
  17. Native USB support using the SAMD21’s USB hardware
  18. USB bootloader with a double-tap reset button for entering bootloader mode
  19. CircuitPython and Arduino IDE compatible

Package Includes:

1 x Adafruit Trinket M0 – for use with CircuitPython & Arduino IDE

0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.