Spectra Symbol ThinPot Linear Potentiometer-TSP-L-0100-103-3%-RH 100mm Female Plain Housing Connector ±3% Linearity

  1. Linear Position Sensor
  2. Half the width of the SoftPot
  3. IP64 Dust Proof, Splash Proof
  4. Polyester Substrate
  5. 3M Pressure Sensitive Adhesive (PSA)
  6. Repeatability: No hysteresis, but with any wiper looseness some hysteresis will occur.
  7. Power Rating (depending on size, varies with length and temperature): 1 Watt max. @ 25°C, 0.5 Watt recommended
  8. Resolution: Analog output theoretically infinite; affected by variation of contact wiper surface area.

 1,390.00

Out of stock

Out of stock

18 People watching this product now!

Datasheet

DOWNLOAD

Operating Temperature

-40°C to +50°C

Humidity

No affect @ 95% RH, 4hrs 50°C

IP Rating of Active Area

IP64

Linear Range

0 ~ 100.00mm (0 ~ 3.94″)

Actuator Type

Flexible Membrane – Linear

Linearity

±3%

Resistance

10 kOhms

Resistance Tolerance

±20%

Mounting Type

Custom

Termination Style

Connector

Package / Case

Sensor Strip

Length (mm):

138

Width (mm):

9.5

Height (mm):

0.5

Weight (g):

1 (approx)

Shipping Weight 0.005 kg
Shipping Dimensions 16 × 10 × 1 cm

This is Spectra Symbol ThinPot Linear Potentiometer-TSP-L-0100-103-3%-RH 100mm Female Plain Housing Connector ±3% Linearity. ThinPot membrane potentiometer is a resistive element, which comprises a conductive resistor, a sealed encasement and a simple wiper assembly. A membrane potentiometer can also function as a voltage divider.

The ThinPot is a three-wire system with two resistive output channels and an electrical collector channel. By pressing a wiper down onto the top circuit, it produces the desired electrical output. The “wiper” is a non-conductive mechanism that depresses the top circuit actuating the potentiometer from the outside of the element. The top and bottom circuits are separated by 0.15mm (0.006″) of spacer adhesive build-up and contact between the circuit occurs by pressure (usually 0.7-1.8 Newtons) from the wiper on the top circuit, pushing down until the top circuit connects with the bottom circuit to create a potentiometric output.

The construction of the wiper design can adapt to any application because most materials can serve as the wiper: plastics, metals, sliders, rollers, wheels, etc. Also, the ThinPot can also be manually (hand) actuated.

Note: Product image shown is a representation only, actual product may vary in dimensions and color. Exact specifications and technical details should be obtained from the product data sheet from the ATTACHMENTS section.


Features:

  1. Linear Position Sensor
  2. Half the width of the SoftPot
  3. IP64 Dust Proof, Splash Proof
  4. Polyester Substrate
  5. 3M Pressure Sensitive Adhesive (PSA)
  6. Repeatability: No hysteresis, but with any wiper looseness some hysteresis will occur.
  7. Power Rating (depending on size, varies with length and temperature): 1 Watt max. @ 25°C, 0.5 Watt recommended
  8. Resolution: Analog output theoretically infinite; affected by variation of contact wiper surface area.
  9. Dielectric Value: No affect @ 500VAC for 1 minute

Package Includes:

1 x Spectra Symbol ThinPot Linear Potentiometer-TSP-L-0100-103-3%-RH 100mm Female Plain Housing Connector ±3% Linearity

0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.