Waveshare 1.54 inch e-Ink Paper Display Module with SPI Interface

Waveshare 1.54 inch e-Ink Paper Display Module with SPI Interface comes with 200×200 resolution and embedded controller module. It is communicating via SPI interface and it supports partial refresh. As these displays have no backlight panels and it doesn’t need a continuous power supply to display the (static data with periodic intervals) data on the screen, it has a great advantage of ultra-low power consumption. Also, it has a wide viewing angle, great viewing effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features:

1. No backlight so keeps displaying last content for a long time even when the power is down
2. Ultra low power consumption, basically power is only required for refreshing
3. SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
4. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
5. Wide viewing angle, great viewing effect under sunlight.

Interface:

SYMBOL
DESCRIPTION

VCC
3.3V/5V

GND
Ground

DIN
SPI MOSI pin

CLK
SPI SCK pin

CS
SPI chip selection, low active

DC
Data/Command selection (high for data, low for command)

RST
External reset, low active

BUSY
Busy status output, high active

Useful Links:

Development Resources: Wiki link: www.waveshare.com/wiki/1.54inch_e-Paper_Module

Tutorial: Make a new larger font for Waveshare SPI e-Paper

Package Includes:

1 x Waveshare 1.54 inch e-Ink Paper Display Module with SPI Interface (Res: 200 x 200)

1 x Interfacing Cable