Ultrasonic Intelligent Bluetooth Robot Car Kit

This is an Ultrasonic Intelligent Bluetooth Robot Car Kit. The kit is designed for hobbyists and students. Featuring large size chassis plates cut from acrylic and designed with numerous holes and mounting points, providing plenty of space to carry a PCB board and any additional components that you choose. The possibilities are only limited by your imagination.

This Ultrasonic Intelligent Bluetooth Robot Car Kit includes all of the parts needed to assemble the 4WD Robot Car Chassis Kit as well as a battery holder for 2 18650 batteries, four gear motors with 65mm wheels, etc. The individual Ultrasonic Intelligent Bluetooth Robot Car Kit components are given the Package Includes section below.

Note: This car kit required 2 x 18650 Rechargeable Batteries. which is not included in the kit Box due to different shipping categories. You can buy any 18650 Battery separately. Following are the link to buy these batteries

Orange ICR 18650 2000mAh 20C Lithium-Ion Battery

Orange ICR 18650 2200mAh 22F Lithium-Ion Battery

SAMSUNG INR18650-25R 2500mAh Li-Ion Battery

SAMSUNG ICR18650-26 J 2600mAh Li-Ion Battery

PANASONIC NCR 18650B 3400 mAh Li-Ion Battery

Also, IR Remote control does not come with Battery for the same reason. Following is the link to buy a battery for IR Remote

Panasonic CR2032 3V Lithium Coin Battery

Note: For user manual go through the link.

Features:

1. The control motor selection L298N drive module, and single-chip microcomputer real isolation.
2. The obstacle avoidance of the HC – SR04 ultrasound, stable performance, precise measure distance.
3. Can access external 7 ~ 12 V voltage.
4. And can carry many sensor modules, according to your imagination to realize various functions.

Package Includes:

1 x 18650 2xBattery box with 2.5 DC Plug

1 x 18650 2xBattery Charger

1 x L298N Motor Driver Board

1 x HC-SR-04 Ultrasonic Module

1 x HC-01 Bluetooth Transceiver Module

1 x Infrared Remote Receiving Sensor

1 x Single-chip IR Remote Control

1 x USB to USB Type B Arduino Cable

1 x Tower Pro SG 90 Servo Motor with Accessories

1 x Pan Tilt Camera/Sensor bracket Assembly for SG90 Servo

1 x ARDUINO UNO R3 Development  Board

1 x Arduino Sensor Expansion board (Sensor Shield 5.0)With Bluetooth socket

1 x 40 Wire Female to Female Dupont Line

1 x Screw Nut Set

1 x Wire Set (20cm x 8 wires Red and Black)

2 x The Robot Chassis Assembly

3 x Line Sensor Module

4 x Tyres

4 x BO Gear Motor