DJI NAZA M V2 Multirotor Autopilot Controller set with GPS

DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS Supports nine multi-rotor configurations, the DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flying condition. There are four components to the system.

The MC (main controller) houses the flight computer and is at the heart of the flight control system. Then there is the PMU (power management unit), which serves to regulate how much power is sent to each of the four, six, or eight rotors. Finally, a GPUs receiver/compass combo is included, which enables a number of features, including Intelligent Orientation Control (IOC) and the Go Home failsafe.

CAN-Bus ports on the MC allows the Naza-M to interface with a number of DJI accessories, including the Ground Station System, the iOSD Module, or a gimbal control unit (GCU).

To know how to choose flight controller click here.

What’s the difference of NAZA-M Lite/ NAZA-M V1/ NAZA-M V2 :

Product

Target Customer

Hardware

Software

Function Extension Ability

Major Components

NAZA-M Lite
AP/RC entry level
Based on NAZA V1 platform; no extension ability
NAZA lite Independent assistant software and firmware;
1.GPS (Optional)
2.No extended function (does not support NAZAV2-PMU, Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD)
MC
GPS（optional）
BEC/LED（Will have independent BEC and LED in the future）

NAZA-M V1
AP/RC hobbyist
Can be connected to the NAZA V2-PMU, and will have the NAZA-M V2 expansion function;
Share the same NAZAM V2 assistant software and firmware;
1.GPS (Optional)
2.Function extension through NAZAV2-PMU: such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station
MC
GPS（optional）
BEC/LED

NAZA-M V2+GPS Combo
AP/RC hobbyist
Optimized hardware structure;
Independent PMU module with amazing function extension ability;
Independent LED module;
Amazing function extension：such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station
MC
GPS
NAZAPMU V2
LED

Features :

1. All-In-One Compact Multi-Rotor Autopilot System
2. New Assistant Software for Smartphones
3. Supported Multi-rotors Quad-rotor: I4, X4
4. Hex-rotor: I6, X6, IY6, Y6
5. Octo-rotor I8, V8, X8
6. Free Ground Station
7. Take-Off Assistance
8. Multiple Flight Control Modes and Intelligent Switching
9. GPS Module Available for Accurate Position Stabilization
10. Intelligent Orientation Control (IOC)
11. Supports General, PPM, and S-Bus Receivers
12. Arm/Disarm Modes for Safe Motor Starting
13. 2-Axis Gimbal Stabilization
14. Two Levels of Low Voltage Warnings and Protection
15. Single Motor Failure Protection
16. Supported ESC Output 400 Hz refresh frequency
17. Supported Transmitters PCM or 2.4 GHz radio with at least 4 channels
18. Supports Remote Gain Adjustment from the Transmitter
19. Enhanced Failsafe Features, Including Auto Return-to-Home
20. Compatible with DJI Video Downlink, iOSD, Ground Station, ZH4-3D/H3-3D Gimbals, and Future Products
21. Supports 9 Different of Multi-Rotor Configurations, Ideal for DJI F450/F550 and E Series Tuned Propulsion Systems

System Requirements:

1. Assistant Software Windows: 8, 7, XP SP3
2. OS X: 10.6 or later
3. Mobile: iPhone 4s, iPhone 5, iPod touch 5, iPad mini, iPad 4

Flight Performance:

1. Hovering Accuracy (GPS Mode) Vertical: ±2.6′ / ±0.8 m
2. Horizontal: ±8.2′ / ±2.5 m
3. Max Angular Speed 200°/s
4. Max Tilt Angle 35°
5. Ascent/Descent Ascent: 19.7 ft/s / 6 m/s
6. Descent: 14.8 ft/s / 4.5 m/s

Package Includes :

1 x Main Controller Unit.

1 x Power Management unit.

8 x Servo cable.

1 x LED Module.

1 x Micro USB Cable.

2 x Adhesive Tape.

1 x GPS Module.