STMICROELECTRONICS Expansion Board, NFC Card Reader, Read/Write, CR95HF, For STM32 Nucelo, Arduino Compatible

The X-NUCLEO-NFC03A1 (see Figure 1) is an NFC card reader evaluation board based on CR95HF-VMD5T to enable expansion of the STM32 Nucleo boards. The CR95HF manages frame coding and decoding in Reader mode for standard applications, such as NFC, proximity, and vicinity standards. The CR95HF embeds an analog front end to provide the 13.56 MHz air interface. The CR95HF supports ISO/IEC 14443 Type A and B, ISO/IEC 15693 (single or double subcarrier), and ISO/IEC 18092 communication protocols, besides being MIFARE® Classic compatible(a). It also supports the detection, reading, and writing of NFC Forum Type 1, 2, 3, and 4 tags.

Note: For more technical details go through the datasheet in  the attachment section 

Features:

1. NFC (Near Field Communication) card reader evaluation board based on CR95HF, designed for expansion of STM32 Nucleo boards
2. Reader/Writer modes supported
3.  47 mm x 34 mm, four turns, 13.56 MHz
   inductive antenna etched on PCB and associated tuning circuit
   • RF communication
   – ISO/IEC 14443 (A and B)
   – ISO/IEC 15693
   – ISO/IEC 18092
   – MIFARE® Classic compatible
4. Equipped with Arduino™ UNO R3 connector
5.  Four general-purpose LEDs
6.  Scalable solution, capable of cascading
   multiple boards for larger systems

Package Includes:

1 x STMicroelectronics Expansion Board NFC Card Reader, Read/Write, CR95HF, For STM32 Nucelo, Arduino Compatible