SmartElex Atmospheric Sensor Breakout BME280

Click here to see why SmartElex is different!

The SmartElex BME280 Atmospheric Sensor Breakout is an easy way to measure barometric pressure, humidity, and temperature readings without taking up too much space. Basically, anything you need to know about atmospheric conditions, you can find out from this tiny breakout. The BME280 Breakout has been designed to be used in indoor/outdoor navigation, weather forecasting, home automation, and even personal health and wellness monitoring.

The onboard BME280 sensor measures atmospheric pressure from 30 kPa to 110 kPa as well as relative humidity and temperature. The breakout provides a 3.3V SPI interface, a 5V tolerant I2C interface (with pull-up resistors to 3.3V), takes measurements at less than 1mA, and idles less than 5A. The BME280 breakout board has 10 pins, but no more than six are used at a single time. The left side of the board provides power, ground, and I2C pins. The remaining pins, which provide SPI functionality and have another power source and ground, are broken out on the other side.

Note: The breakout does not have headers installed and will need to be purchased and soldered on yourself.

Features:

1. Operation Voltage: 3.3V
2. I2C & SPI Communications Interface
3. Temp Range: -40ºC to 85ºC
4. Humidity Range: 0 – 100% RH, =-3% from 20-80%
5. Pressure Range: 30,000Pa to 110,000Pa, relative accuracy of 12Pa, absolute accuracy of 100Pa
6. Altitude Range: 0 to 30,000 ft (9.2 km), relative accuracy of 3.3 ft (1 m) at sea level, 6.6 (2 m) at 30,000 ft.
7. Incredibly Small

Package Includes:

1 x SmartElex Atmospheric Sensor Breakout BME280