Pimoroni Pirate Audio Headphone Amplifier For Raspberry Pi RoboNepal.com Nepal Buy in Nepal
Pirate Audio Headphone Amp For Raspberry Pi RoboNepal.com Nepal Buy in Nepal
Pirate Audio Headphone Amp For Raspberry Pi RoboNepal.com Nepal Buy in Nepal
Pirate Audio Headphone Amp For Raspberry Pi RoboNepal.com Nepal Buy in Nepal
Pirate Audio Headphone Amp For Raspberry Pi RoboNepal.com Nepal Buy in Nepal
Click to enlarge
Pimoroni Pirate Audio Headphone Amplifier For Raspberry Pi RoboNepal.com Nepal Buy in Nepal
Pirate Audio Headphone Amp For Raspberry Pi RoboNepal.com Nepal Buy in Nepal
Pirate Audio Headphone Amp For Raspberry Pi RoboNepal.com Nepal Buy in Nepal
Pirate Audio Headphone Amp For Raspberry Pi RoboNepal.com Nepal Buy in Nepal
Pirate Audio Headphone Amp For Raspberry Pi RoboNepal.com Nepal Buy in Nepal

PIMORONI Pirate Audio: Headphone Amplifier with 3.5mm jack for Raspberry Pi

  1. Onboard 3.5 mm Stereo Jack for Audio Output
  2. PAM8908 Headphone Amplifier Chip
  3. PCM5100A Audio Amplifier Chip
  4. Compatible With Raspberry Pi 40 Pin GPIO Header

₨ 100.10

Out of stock

Out of stock

Compare
Add to wishlist
20 People watching this product now!

Pirate Audio Software

DOWNLOAD

PCM5100A Datasheet

DOWNLOAD

PAM8908 Datasheet

DOWNLOAD

Audio Amplifier

PCM5100A
Headphone Amplifier

PAM8908
Audio Output

3.5mm Stereo Jack
Onboard Display

1.3″ IPS colour LCD
Compatible With

Raspberry Pi 40 Pin GPIO Header
Length (mm):

65
Width (mm):

30.5
Height (mm):

9.5
Weight (g):

15
Shipping Weight 0.018 kg
Shipping Dimensions 7 × 4 × 1 cm

Build your own home-brew iPod Nano with Pirate Audio Headphone Amplifier by PIMORONI! It’s an all-in-one solution, with a gorgeous album art display, track info, and playback controls, for playing your local audio files (MP3, FLAC, etc) or streaming music from Spotify. The DAC and headphone amp gives you crisp digital amplified audio through your wired headphones.

PIMORONI pirate audio LINE OUT is a range of all-in-one audio boards for Raspberry Pi, with high-quality digital audio, beautifully-crisp IPS displays for album art, tactile buttons for playback control, and our custom Pirate Audio software and installer to make setting it all up a breeze.

Notes:

  • The low-gain mode is recommended for most use-cases.
  • The DAC can be configured by adding dtoverlay=hifiberry-dac to the /boot/config.txt file.
  • There is a DAC enable pin—BCM 25— that must be driven high to enable the DAC. You can do this by adding gpio=25=op,dh to the /boot/config.txt file.
  • The buttons are active low and connected to pins BCM 5, 6, 16, and 24.
  • The display uses SPI, and you’ll need to enable SPI through the Raspberry Pi configuration menu.
  • If you want to use these boards with a Pibow Coupé case (either for the Zero / Zero W or Pi 4), then you’ll need to use a booster header to raise it up a little.

    • Features:

    1. Amplified digital audio (24-bit / 192KHz) over I2S
    2. PAM8908 headphone amplifier chip
    3. Low-gain / high-gain switch (high-gain boosts by 12dB)
    4. PCM5100A DAC chip
    5. 3.5mm stereo jack
    6. 1.3″ IPS colour LCD (240x240px) (ST7789 driver)
    7. Four tactile buttons
    8. Mini HAT-format board
    9. Fully-assembled
    10. Compatible with all 40-pin header Raspberry Pi models

    Package Includes:

    1 x PIMORONI Pirate Audio Headphone Amplifier for Raspberry Pi

    0 reviews
    0
    0
    0
    0
    0

    Reviews

    Clear filters

    There are no reviews yet.

    Only logged in customers who have purchased this product may leave a review.

    Related Products