FTDI-FT232RNQ – USB 2.0 Slave to UART Converter-IC

The FT232RNQ is added to FTDI’s range of USB UART interface Integrated Circuit Devices. The FT232RNQ is a USB-to-serial UART interface with optional clock generator output and the new FTDIChip-ID™ security dongle feature. In addition, asynchronous and synchronous bit-bang interface modes are available. USB to serial designs using the FT232RNQ has been further simplified by fully integrating the external EEPROM, clock circuit, and USB resistors onto the device.

The FT232RNQ adds two new functions compared with its predecessors, effectively making it a “3-in-1” chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID™) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle that can be used to protect customer application software from being copied.

The FT232RNQ is available in Pb-free (RoHS compliant) compact 28-Lead SSOP and QFN-32 packages.

Note:

1. The product may vary in shape, color, and markings as compared to the image shown depending on availability.
2. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

1. Single chip USB to asynchronous serial data transfer interface.
2. Entire USB protocol handled on the chip – No USB-specific firmware programming required.
3. UART interface support for 7 or 8 data bits, 1 or 2 stop bits, and odd / even / mark/space / no parity.
4. Fully assisted hardware or X-On / X-Off software handshaking.
5. Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
6. In-built support for event characters and line break conditions.
7. New USB FTDIChip-ID™ feature.
8. New configurable CBUS I/O pins.
9. Auto transmit buffer control for RS485 applications.
10. Transmit and receive LED drive signals.

Package Includes:

1 x FT232RNQ – USB 2.0 Slave to UART Converter-IC