FTDI-FT232HL- Single Channel Hi-Speed USB to Multipurpose UART/FIFO-IC

TDI FT232HL Single-Channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO-ICs have the capability of being configured in a variety of industry-standard serial or parallel interfaces. FTDI 232HL UART/FIFO-ICs feature single-channel USB to serial/parallel ports with a variety of configurations. FT232HL devices handle the entire USB protocol on the chip.

These FTDI UART/FIFO-ICs are designed for a variety of applications, including single-chip USB to UART (RS232, RS422, or RS485), USB to FIFO, and more. FTDI UM232HL USB-to-serial / FIFO development modules use the FT232HL chip to handle the USB signaling and protocols. The UM232HL module is ideal for development purposes to quickly demonstrate the functionality of adding USB to a target design.

Applications:

1. USB instrumentation
2. USB industrial control
3. USB EPOS control
4. USB MP3 player interface
5. USB FLASH card reader/writers
6. Set-top box PC – USB interface

Note:

1. The product may vary in shape, color, and markings as compared to the image shown depending on availability.
2. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

1. Single-channel USB to serial/parallel ports with a variety of configurations
2. The entire USB protocol is handled on the chip; no USB-specific firmware
   programming required
3. USB 2.0 Hi-Speed (480Mb/s) and Full-Speed (12Mb/s) compatible
4. Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous
   serial protocol (USB to JTAG, I2C, SPI, or bit-bang) design
5. UART transfer data rate up to 12Mbaud (RS232 Data Rate limited by
   external level shifter)
6. CPU-style FIFO interface mode simplifies CPU interface design
7. FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases

Package Includes:

1 x FT232HL- Single Channel Hi-Speed USB to Multipurpose UART/FIFO-IC