BIGTREETECH BTT TMC2130 V3.0 SPI Stepper Motor Driver for 3D Printer

This is a BTT TMC2130 V3.0 SPI. BIGTREETECH SPI Mode TMC2130 V3.0 Stepper Motor Driver Super Silent for 3D Printer. The TMC2130 is a high-performance driver IC for two phase stepper motors. drive current 1.2A, peak current 2A, 12V/24V DC, 256 subdivision. With a standard SPI interface, you can use SPI mode on your SKR 2/ SKR Pro board directly by setting jumper cap. BTT TMC2130 V3.0 SPI motor driver adopts StealthChop chopper technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque.

The noise of the BTT TMC2130 V3.0 SPI motor is below 10dB, which is much lower than that of the traditional current controller. SpreadCycle PWM chopped mode is automatically divided between slow and fast attenuators, the motor controlled by the PWM chopper mode operated more smoothly and avoid losing steps and Jittering. CoolStep allows reducing energy consumption by up to 75%. DcStep drives high loads as fast as possible without step loss.

Features:

1.  stealthChop for extremely quiet operation and smooth motion
2. spreadCycle highly dynamic motor control chopper
3. coolStep current control for energy savings up to 75%
4.  Passive Braking and freewheeling mode
5. Full Protection & Diagnostics

Package Includes:

1 x BTT TMC2130 V3.0 SPI

1 x 4Pin Connector

1 x Heat sink